New Esco FLANGE HOG 110® Flange Facing Tool Eliminates the Need to Replace Flanges in Virtually any Flanged Piping System

Mar 03, 2020

Esco Tool has introduced a new portable and compact flange facing tool that eliminates the need to cut pipe and replace flanges when changing valves in virtually any flanged piping system. Easy to setup and use, it requires only about a 10” opening between flanges and refaces damaged RF and FF gasket seats on flanges with a phonographic finish that meets B16.5 standards.

The Esco FLANGE HOG 110® Flange Facing Tool is manually operated and eliminates the expense associated with valve replacement including cutting pipes, welding new flanges in place, and X-ray inspection. Easy to setup and use, it requires only about a 10” opening between flanges and re-faces damaged RF and FF gasket seats on flanges with a phonographic finish.

Creating a perfect finish that meets B16.5 standards, the Esco FLANGE HOG 110® Flange Facing Tool mounts to the flange I.D. in a few minutes with a clamping range of 0.9” to 10” and 0.005” alignment accuracy. Capable of rapidly machining highly alloyed flanges with a reach up to 14” O.D., it comes with straight and 90 degree tool bit holders and uses two-sided bits.

The Esco FLANGE HOG 110® is priced at $5,995.00 supplied as a complete kit with all necessary resurfacing components and is also available for rent.

Contact

ESCO Tool - A Unit of Esco Technologies, Inc.

Matthew Brennan,

Marketing Director

75 October Hill Rd.

MA 01746 Holliston

United States

Phone:

+1 800 343 6926

Fax:

+1 508 429 2811

E-Mail:

matt@escotool.com

Internet:

To website

© 2024 visaplan GmbH, a subsidiary of Prof. Dr. Ing. Stein & Partner GmbH

UNITRACC 3.10.14.1