BE-15 Pipes and Materials: Welding of Plastic Pipes

Electrofusion welding

Working steps

  1. Clamping pipe ends axially and cutting them to length square to the pipe axis
  2. Measuring the welding zone and marking it
  3. Removing the oxide layer
  4. Trimming the pipe ends outside and inside
  5. Checking the roundness of pipes and adjusting, if necessary
  6. Cleaning pipe surfaces to be welded and interior side of the heated coil connector
  7. Inserting pipe ends into the heater coil connector
  8. Welding
/ 87