Pump That Sludge – With Optimum Efficiency
Mar 16, 2020
Efficient sludge pumping has an important role to play as water companies gear up for zero carbon, says Mick Dawson, consultancy director, BHR Group, who urges designers and operators to better understand their sludge systems.
For decades the industry standard calculation technique for sludge pumping system pressure losses has been WRc’s TR 185 How to design sewage sludge pumping systems document, which dates back to 1983 and has served the industry well. It suited a pre-digital era when water companies could afford to build in a wide safety margin because energy was less costly, carbon went unquantified and budgets were bigger.
Other recent factors impacting directly on sludge processing are population growth, which is increasing volumes, and legislation restricting disposal to land. This means utilities are using intensive techniques like thermohydrolysis, which result in sludges with higher dry solids content.
Under-sizing can mean failure to achieve the required throughput, whilst oversizing leads to excessive capital cost and energy consumption. Utilities can no longer squander energy and emit unnecessary carbon and the cost challenge means they need to get to know their assets and process streams much better.
Variables include pipe size, length, roughness, fittings and elevation as well as the viscosity and temperature of the sludge and the flow rate desired by the operator. To ensure efficient pumping systems, design engineers estimate total pressure losses across the range of variables at a given site.
If these estimates are inaccurate this can result in oversized pumps and higher frictional losses, adding considerable capital and operational cost to any system.
The good news is that engineers can now predict sludge rheology and assess and interpret the impact and interaction of these variables through a sophisticated systems losses tool developed by BHR Group. SLOT 2.0, which was launched in January 2020, is a software program developed as part of a research programme originally funded by UK water companies and suppliers.
The software enables pump system operators to understand where each pump should be operating on its pump and efficiency curves, matching against the particular system pressure curve to find the operating point. This makes it possible to determine optimum pump-operating points and identify the most effective pumps to use on a given system – selecting the optimal size, type, quantity and configuration, right down to the manufacturer. Potential blockages can also be identified by monitoring the actual versus the predicted pump performance.
It is realistic to envision pump system designers using SLOT 2.0 to digitally twin the sludge pipe network. Being able to accurately compare pressure and flow in the real network with SLOT’s predictions, it is possible to see, for example, what would happen to pump operation in the event of a struvite blockage; or how the system would respond if a sludge stream was thickened by eight per cent.
For new-build sludge processing projects, SLOT 2.0 is the best tool available for accurate sizing of pumps and pipes. It is underpinned by BHR Group’s sludge rheology database, which is the largest in the world, and makes it much easier to characterise new sludge types that cannot be predicted using existing rheology data.
Fifteen utility and contracting companies in the UK have already trialled sludge management operations with SLOT 2.0 and feedback to date has been very positive. Indications are that the value of being able to predict and manage sludge network performance at the desktop, before going out on site, will prove massively powerful going into AMP 7 – the regulatory asset management period 2020-2025.
Meanwhile, BHR Group is continually improving SLOT, with further advancements anticipated as users relay their experiences and requirements. The long-term outlook heralds greater capacity sludge systems with higher velocity throughput and solids content, which means the need for close attention to the whole performance envelope is only going to grow.
More News and Articles
Apr 09, 2020
...from UNITRACC's team.
Apr 09, 2020
egeplast international Acquires Majority Stake in Extena, Market and Quality Leader for Plastic Pipes in Sweden
egeplast international GmbH, a medium-sized family enterprise based in Greven, Germany, acquires a 75-percent stake in the Swedish company Extena AB. Extena is the leading provider of plastic pipes for the Swedish infrastructure. Founded in 1976 in Norsjö and with …
Apr 08, 2020
Ofwat’s chief executive Rachel Fletcher urged members of the supply community to actively engage with water companies and be assertive to ensure their voices are heard ahead of the 2020-2025 investment period.
Apr 07, 2020
TEPPFA Calls on EU and Member State Authorities to List Drinking Water, Sanitation and Waste Water and Their Supply Chains as Vital Under COVID 19 Restrictive Measures
TEPPFA is the Brussels based leading voice of plastic pipe and fittings manufacturers. The 12 direct company members – most of them worldwide leading multinationals – combined with the indirect local company members from 15 national associations represent 350 production …
Apr 06, 2020
New Jersey American Water to Continue Planned Infrastructure Work Amidst COVID-19 Public Health Emergency
Pipeline replacements and other planned system improvements to continue as essential work to provide reliable water and wastewater services.
Apr 03, 2020
Xylem Withdraws First Quarter and Full-Year Guidance, Continues Serving Customers on Front Lines of Essential Services
Global water technology company Xylem Inc. withdrew its financial guidance for the first quarter of 2020 and for the full year, because of the impact of COVID-19.
Apr 02, 2020
Electro Scan (UK) Ltd. Achieves UK Health & Safety Accreditation to Deliver Next Generation AMP 7 Leak Detection Surveys
New SSIP & SafeContractor status adds to the company’s ISO 9001, 14001, and 18001 certifications to support projects with UK water companies and framework suppliers.
Apr 01, 2020
Granite announced it has been awarded a $36 million contract by the El Dorado Irrigation District (EID) for the Folsom Lake Intake Improvements Project in El Dorado Hills, California, located approximately 20 miles east of Sacramento.
Mar 31, 2020
Essential Utilities Inc. CEO Christopher Franklin and Chief Environmental Officer Dr. Chris Crockett joined Aqua Pennsylvania President Marc Lucca, DEP Regional Director Pat Patterson and a host of state and regional elected officials and contractors as they broke ground on …
Mar 30, 2020
Pipeline Plastics, LLC announced that its Founder and Chief Executive Officer, Monty Fisher, and its Board of Directors have promoted Mike Leathers to both President and Chief Operating Officer. Leathers, who currently serves as the Chief Operating Officer of Pipeline …
Mar 27, 2020
Electro Scan Completes Trial Project for Sydney Water Using Its Advanced Machine-Intelligent Leak Detection Technology
Electro Scan Inc., a leading provider of machine-intelligent pipeline assessment products and services announced that it has completed a trial project of its technology with Sydney Water, Australia’s largest water utility. Traditionally, water utilities have relied on high resolution cameras …
Mar 26, 2020
Building on the success of the D220x300 S3 Navigator® horizontal directional drill (HDD), which created a new category in the HDD industry, Vermeer is setting a new standard with the D220x500 S3 Navigator® horizontal directional drill. With the ability to …