Plastics Pipe Institute Issues Advisory for Substandard Plastic Pipe
Sep 28, 2018
The Plastics Pipe Institute, Inc. (PPI) issued a warning about substandard plastic pipe. High-density polyethylene (HDPE) pipe that does not comply with relevant product standards has been found in the oil and gas gathering operations of the Permian and Delaware basins in Texas and New Mexico, according to the association.
These pipelines are not marked with relevant product standard requirements, and may not comply with those product standards. Pipe that is not properly marked or certified provides no assurance of product quality and may not perform as intended for the application.
The notice extends to other areas where HDPE pipe is widely used such as potable water, forced main sewers, industrial, and mining applications. PPI is the major North American plastic pipe trade association with many of its member companies producing resins, pipe, fittings, and components.
"We're issuing this advisory because we are seeing HDPE pipes that have significant quality issues," stated Tony Radoszewski, CAE, president of PPI. "In some cases neither the manufacturer nor the origin of the pipe could be identified. Unfortunately, due to the quickly rising demand for HDPE pipe we're seeing an influx of pipe that does not meet industry standards.
Properly marked HDPE pipe will be imprinted to identify specific standards, and to help confirm that the pipe is suitable for its intended purpose. But this cannot be relied upon by itself as a printline is no guarantee of the quality of the pipe. There are other end-user validation points such as Certificates of Quality from the manufacturer, on-site inspections of the plant, and an array of short-term physical property and mechanical tests and measurements on produced pipe to verify pipe quality.
"Manufacturers can participate in the quality systems established in the industry. This starts with a TR-4 listing in the Plastics Pipe Institute Hydrostatic Stress Board Program plus unannounced audits conducted by a certifying body.
"Pipe not in compliance could jeopardize the safety of employees, the public and the environment. Piping products should be inspected upon delivery to ensure they meet the appropriate standards and the operator’s specifications. This is especially critical for projects in demanding oil and gas field operations, and is also important for pipe used in other pressure applications such as water, sewer, industrial, and mining applications.”
The association also recommends that purchasers review the pipe manufacturer's certification reports along with physical plant inspections or independent third-party validation and testing.
"There is time, effort and labor needed to develop the standards and to produce product that will meet those standards," Radoszewski stated. "Not all HDPE pipe is created equally. Know what resin is being used in the manufacture of the pipe. Know what company is making the pipe. Know what company is selling the pipe. There is a considerable investment for the resin manufacturer and the pipe manufacturer to produce high-performance products.
There is a cost for quality because of the steps required from the manufacturing of the plastic resin to the extrusion of the pipe in order to produce a product that meets industry standards and regulations. But the benefits definitely outweigh the extra cost. No one wants a catastrophic pipeline failure caused by substandard pipe."
More News and Articles
Mar 27, 2024
News
USU Study Looks at Water Main Break Rates in the U.S. and Canada
Report Highlights Correlation Between Material and Diameter
Mar 26, 2024
News
Update BE-21: New Material in Course and Modules on Trenchless Pipe Installation
Online training on the topic of pipeline installation in civil engineering: Trenchless technology for underground drainage construction can be a resource-efficient, environmentally friendly, time-saving, and cost-effective alternative to open cut methods. The UNITRACC e-learning course "Utility Tunnelling" has been enhanced …
Mar 25, 2024
Article
Bacteria as a new weapon in wastewater treatment
In early November, San Diego based startup Aquacycl officially opened its first European office and test center at the Water Campus in Leeuwarden. The Netherlands Foreign Investment Agency (NFIA) and the Investment and Development Agency for the Northern Netherlands (NOM) …
Mar 22, 2024
News
A superior HDD offering
Building on its relationships with leading horizontal directional drilling companies, TRACTO Australia has delivered three new rigs to operator Superior HDD.
Mar 20, 2024
News
New portable water filtration technology could improve access to clean drinking water worldwide
The University of Texas at Austin has developed an injectable water filtration system with the aim to aid the over two billion people worldwide who are without clean drinking water.
Mar 18, 2024
News
Global Student Innovation Challenge Calls on Next-Generation Leaders to Tackle Water Security
High School and University Students Worldwide Invited to Expand Water Access and Community Resilience
Mar 15, 2024
News
New water treatment wins Prestigious Award
Introducing a advancement in water treatment, developed by Cardiff University researchers in collaboration with Origin Aqua, the FreeOxTM technology has garnered acclaim by winning a prestigious challenge award at the World Water Tech Innovation Summit. This single-step process not only …
Mar 13, 2024
News
Satellite-based river monitoring technique could provide early warning of flooding
A satellite-based method for monitoring the flow of rivers from orbit could provide a valuable early warning system for flood risk, University of Glasgow researchers have claimed.
Mar 11, 2024
News
Revitalising infrastructure with HDD
Through the use of horizontal directional drilling, TasWater is delivering a new sewer pipeline to improve sewer and stormwater transfer capacity in Launceston, Tasmania.
Mar 06, 2024
News
Picking up the pace on climate action: Building momentum from COP28
At the halfway point of the Paris Agreement, the legally binding international treaty on climate action, average global temperatures are already hitting 1.8°C above pre-industrial levels and future projections are stark. At COP28 in December, we could not escape the reality …
Mar 01, 2024
News
Luminescent sensor detects ‘forever chemical’ pollution in water
Researchers in the UK and Germany have developed a new approach for detecting pollution from ‘forever chemicals’ in water through luminescence.
Feb 28, 2024
Article
BETT installation demonstrating GHG emissions reduction of wastewater treatment
This study presents BioElectrochemical Treatment Technology (BETT) as a new wastewater management solution toward the Net-Zero future. The results reported herein were collected from a BETT pilot system installed at a large brewery in Los Angeles, CA, United States processing …
Contact
The Plastics Pipe Institute, Inc.
Steve Cooper
105 Decker Court, Suite 825
75062 Irving TX
United States
Phone:
+1 516-623-7615